| Gloves |
- Meet ASTM D6978
- Powder Free
- Inspected for defects before use
|
- Every 30 minutes or when torn or contaminated
- Upon leaving the handling area
|
Sterile - 19683, 19891
Nonsterile - 20688, 18917 |
| Gowns/Aprons |
- Proven to resist permeability by HDs
- Disposable
- Polyethylene coated polyproylene
- Long sleeves
- Close in the back (no open front)
- Closed elastic or knit cuffs
- Closed seams or closures
|
- Per permeation testing by manufacturer or every 2-3 hours
- Immediately after a spill or splash
- Upon leabving the handling area
|
Sterile - 19662, 19658
Nonsterile - 19661, 19659, 19984 |
| Head, Hair and Shoe Covers |
- 2 pairs of shoe covers are required for sterile HD compounding
- Beard and mustache covers are required when appropriate
|
- Upon leaving the handling area
|
Sterile - 20214, 19874, 20950
Nonsterile - 12077, 19346, 19352, 20208, 12078, 20576, 20209, 19352-31, 19876, 20249, 12081, 20455, 20577 |
| Sleeve Covers |
- Disposable
- Coated materials
|
- When task is complete
- Upon leaving the handling area
|
Sterile - 20516
Nonsterile - |
| Eye and Face Protection |
- Must be worn when there is a risk for spills and splashes
- Goggles must be worn when eye protection is needed
- Face shields should be used in combination with goggles
|
- Upon leaving the handling area
|
Sterile - 19655
Nonsterile - 19345, 17913, 12926, 20413, 20519, 12926-31 |
| Respiratory Protection |
- Fit tested NIOSH N95 mask, unless working with gasses or vapors
- If unpacking HDs not enclosed in plastic, an elastomeric half-mask with multi-gas cartridge is required
|
- Upon leaving the handling area
|
Nonsterile - 20472 |